-
Spectrometer + thermal desorber
1, short sample time: sample time to meet the user’s rapid screening needs;
2, does not produce waste gas and liquid: no reagents, no pre-treatment, no waste gas and liquid;
3, the use of low cost: no reagents and consumables, the cost of a year within 3000 yuan;
4、Simple operation: directly into the sample, production line workers can operate after training;
5、Built-in standard curve: intuitively determine whether the material exceeds the standard (exclusive technology);
6, without professional laboratory environment: with air-conditioning power supply can be installed in the operating space;
-
HAST Accelerated Stress Test Chamber
Highly Accelerated Stress Testing (HAST) is a highly effective test method designed to evaluate the reliability and lifetime of electronic products. The method simulates the stresses that electronic products may experience over a long period of time by subjecting them to extreme environmental conditions – such as high temperatures, high humidity and high pressure – for a very short period of time. This testing not only accelerates the discovery of possible defects and weaknesses, but also helps to identify and resolve potential problems before the product is delivered, thus improving the overall quality of the product and user satisfaction.
Test Objects: Chips, motherboards and mobile phones and tablets applying highly accelerated stress to stimulate problems.
1. Adopting imported high-temperature resistant solenoid valve dual-channel structure, to the greatest extent possible to reduce the use of the failure rate.
2. Independent steam generating room, to avoid direct impact of steam on the product, so as not to cause local damage to the product.
3. Door lock saving structure, to solve the first generation of products disc type handle locking difficult shortcomings.
4. Exhaust cold air before the test; test in the exhaust cold air design (test barrel air discharge) to improve pressure stability, reproducibility.
5. Ultra-long experimental running time, long experimental machine running 999 hours.
6. Water level protection, through the test chamber water level Sensor detection protection.
7. Water supply: automatic water supply, the equipment comes with a water tank, and not exposed to ensure that the water source is not contaminated.
-
HE 686 Bridge Type CMM
Helium” is a high-end bridge CMM developed and designed by our company. During the production process, each component is strictly screened, and during the assembly process, it is ensured that the components are perfectly and reasonably connected to each other, and then calibrated in accordance with the ISO10360-2 standard, which is calibrated using a high precision laser interferometer and tested with standard inspection tools (square ruler and step gauge) certified by the DKD organisation. The calibration is carried out in accordance with ISO 10360-2, using a high-precision laser interferometer, followed by the use of standardised test tools (square and step gauges) certified by the DKD organisation. As a result, the customer is using a genuine German CMM with high quality and precision.
TECHNICAL PARAMETERS：
● Measuring area : X=610mm,Y=813mm,Z=610mm
● Overall dimension：1325*1560*2680 mm
● Max Part Weight:1120kg
● Machine weight: 1630kg
● MPEe:≤1.9+L/300 (μm)
● MPEp：≤ 1.8 μm
● Scale resolution: 0.1 um
● 3D Max 3D Speed： 500mm/s
● 3DMax 3D Acceleration：900mm/s²
-
Flame Atomic Absorption Spectrometer
Model number
KS-8510
Flame Atomic Absorption Spectrometer
Technical programme
1、Advanced factory, leading technology
2、Reliability and applicability
3、Environmental protection and energy saving
4、Humanization and automated system network management
5、Timely and perfect after-sales service system with long-term guarantee.
-
Single Column Digital Display Peel Strength Test Machine for Laboratory Equipment
The machine can be used for a wide range of applications. It can test the tensile strength, elongation, tearing, adhesion, tensile stress, peel, shear, elongation, deformation and adhesion between rubber and metal of various plastic, rubber, electronic or dumbbell-shaped test pieces by changing different fixtures. It is also possible to carry out closed-loop tests for constant stress, constant strain, creep and relaxation, and to carry out tests for torsion and cupping with special equipment.
-
Seat Front Alternating Fatigue Test Machine
This tester tests the fatigue performance of the armrests of chairs and the front corner fatigue of chair seats.
Seat front alternating fatigue testing machine is used to evaluate the durability and fatigue resistance of vehicle seats. In this test, the front portion of the seat is simulated to be alternately loaded to simulate the stress on the front of the seat when the passenger enters and exits the vehicle.
-
Table & Chair Fatigue Test Machine
It simulates the fatigue stress and wear capacity of the seat surface of a chair after it has been subjected to multiple downward vertical impacts during normal daily use. It is used to test and determine whether the chair seat surface can be maintained in normal use after loading or after endurance fatigue testing.
-
Inclined impact test bench
Inclined impact test bench simulates the ability of product packaging to resist impact damage in the actual environment, such as handling, shelf stacking, motor sliding, locomotive loading and unloading, product transport, etc. This machine can also be used as a scientific research institutes, universities, colleges and universities, packaging technology testing centre, packaging materials manufacturers, as well as foreign trade, transport and other departments to carry out the inclined impact of the commonly used test equipment.
Inclined impact test rigs play an important role in the product design and quality control process, helping manufacturers to evaluate and improve the structural design, material selection and stability of their products to ensure safe and reliable operation in a variety of operating environments.
-
Sofa Durability Test Machine
Sofa durability testing machine is used to evaluate the durability and quality of sofa. This testing machine can simulate the various forces and stresses received by the sofa in daily use to detect the durability of its structure and materials.
-
Three-dimensional Measuring Machine
1、Advanced factory, leading technology
2、Reliability and applicability
3、Environmental protection and energy saving
4、Humanization and automated system network management
5、Timely and perfect after-sales service system with long-term guarantee.
-
Anti-yellowing Aging Chamber
Ageing: This machine is used to promote the deterioration of sulphur-added rubber in order to calculate the rate of change in tensile strength and elongation before and after heating. It is generally accepted that one day of testing at 70°C is theoretically equivalent to 6 months of exposure to the atmosphere.
Yellowing Resistance: This machine is simulated in an atmospheric environment, exposed to UV rays of the sun, and changes in appearance are generally considered to be tested at 50°C for 9 hours. Theoretically equivalent to 6 months of exposure to the atmosphere.
Note: Two types of tests can be done. ( Aging and Yellowing Resistance )
-
High Temperature High Pressure Jet Test Machine
The main purpose of this equipment is for vehicles such as buses, buses, lamps, motorbikes and their components. Under the cleaning process conditions of high pressure/steam jet cleaning, the physical and other relevant properties of the product are tested. After the test, the performance of the product is judged to be up to the requirements through calibration, so that the product can be used for design, improvement, calibration and factory inspection.
