-
Constant temperature and humidity testers
Constant temperature and humidity test chamber, also known as environmental test chamber, test a variety of materials heat resistance, cold resistance, dry resistance, moisture resistance performance. It is suitable for testing the quality of electronic, electrical, communication, instrumentation, vehicles, plastic products, metal, food, chemical, building materials, medical, aerospace and other products.
-
Universal Scorch Wire Tester
The Scorch Wire Tester is suitable for researching and producing electrical and electronic products, as well as their components and parts, such as lighting equipment, low-voltage electrical appliances, household appliances, machine tools, motors, electric tools, electronic instruments, electrical instruments, information technology equipment, electrical connectors, and laying parts. It is also suitable for the insulating materials, engineering plastics, or other solid combustible materials industry.
-
Wire Heating Deformation Testing Machine
The wire heating deformation tester is suitable for testing the deformation of leather, plastic, rubber, cloth, before and after being heated.
-
Vertical and horizontal combustion tester
Vertical and horizontal combustion test mainly refers to UL 94-2006, GB/T5169-2008 series of standards such as the use of prescribed size of the Bunsen burner (Bunsen burner) and a specific gas source (methane or propane), according to a certain height of the flame and a certain angle of the flame on the horizontal or vertical state of the test specimen is a number of times timed to apply combustion to test specimens ignited, burning burning duration and length of burning to assess its flammability and fire hazard. The ignition, burning duration and burning length of the test article are used to assess its flammability and fire hazard.
-
High and low temperature test chamber
High and low temperature test chamber, also known as environmental test chamber, is suitable for industrial products, high temperature, low temperature reliability test. For electronic and electrical engineering, automobile and motorbike, aerospace, ships and weapons, colleges and universities, scientific research units and other related products, parts and materials in the high temperature, low temperature (alternating) cyclic changes in the situation, the test of its performance indicators for product design, improvement, identification and inspection, such as: aging test.
-
Tracking Test Apparatus
The use of rectangular platinum electrodes, the two poles of the specimen force were 1.0N ± 0.05 N. Applied voltage in the 100 ~ 600V (48 ~ 60Hz) between the adjustable, short-circuit current in the 1.0 ± 0.1A, the voltage drop should be no more than 10%, when the test circuit, the short-circuit leakage current is equal to or greater than 0.5A, the time is maintained for 2 seconds, the relay action to cut off the current, the indication of the The test piece fails. Dropping device time constant adjustable, precise control of drop size 44 ~ 50 drops / cm3 and drop interval 30 ± 5 seconds.
-
Hot Wire Ignition Test Apparatus
The Scorch Wire Tester is a device for evaluating the flammability and fire propagation characteristics of materials and finished products in the event of a fire incident. It simulates the ignition of parts in electrical equipment or solid insulating materials due to fault currents, overload resistance and other heat sources.
-
Multi-functional abrasion testing machine
Multi-functional abrasion testing machine for TV remote control button screen printing, plastic, mobile phone shell, headset shell Division screen printing, battery screen printing, keyboard printing, wire screen printing, leather and other types of electronic products surface of the oil spray, screen printing and other printed matter for wear, assess the degree of wear resistance.
-
Melting Index Tester
This model adopts a new generation of artificial intelligence instrument temperature control and double time relay output control, instrument thermostat cycle is short, the amount of overshooting is very small, the temperature control part of the “burnt” silicon controlled module, so that the temperature control accuracy and product stability can be effectively guaranteed. In order to facilitate the use of the user, this type of instrument can be realised manually, time-controlled two test methods for cutting material (cutting interval and cutting time can be set arbitrarily).
-
Universal Needle flame tester
The needle flame tester is a device used to evaluate the ignition hazard of small flames caused by internal equipment failures. It uses a needle-shaped burner with a specified size (Φ0.9mm) and a specific gas (butane or propane) at a 45° angle to time and direct the combustion of the sample. The ignition hazard is evaluated based on whether the sample and the ignition pad layer ignite, the duration of combustion, and the length of the flame.
-
Falling ball impact testing machine
Impact testing machine is suitable for impact strength testing of plastics, ceramics, acrylic, glass, lenses, hardware and other products. Comply with JIS-K745, A5430 test standards.This machine adjusts the steel ball with a specified weight to a certain height, makes the steel ball fall freely and hits the product to be tested, and determines the quality of the product to be tested based on the degree of damage.
-
Computerised Single Column Tensile Tester
Computerized tensile testing machine is mainly used for mechanical property test of metal wire, metal foil, plastic film, wire and cable, adhesive, artificial board, wire and cable, waterproof material and other industries in the way of tensile, compression, bending, shearing, tearing, peeling, cycling and so on. Widely used in factories and mines, quality supervision, aerospace, machinery manufacturing, wire and cable, rubber and plastic, textile, construction and building materials, home appliances and other industries, material testing and analysis.
Rubber & Plastic Electronic Test
-
Phone
-
E-mail
-
Whatsapp
-
WeChat
-
Top