• head_banner_01

Products

Push-pull member (drawer) slams the testing machine

Short Description:

This machine is suitable for testing the durability of furniture cabinet doors.

 

The finished furniture sliding door containing the hinge is connected to the instrument, simulating the situation during the normal use of the sliding door to repeatedly open and close, and check whether the hinge is damaged or other conditions that affect the use after a certain number of cycles.This tester is made according to QB/T 2189 and GB/T 10357.5 standards


Product Detail

Product Tags

Application

Test speed 10~18 times/min can be adjusted
Cylinder stroke 800mm
Maximum height of beam 1200mm
Volume (W*D*H) 1500x1000x1600mm
Weight (approx) 85Kg
Air source 7kgf/cm^2 or more stable air source
Power Supply 1∮AC 220V 50Hz 3A
Opening angle 90-120 degrees
Counter requirements 0-9, 99999

Technical requirements

1. It can be used in the installed product for testing, can be firmly connected with various sliding doors and lateral and should not affect any force of the test.

2. The detection of moving parts can control the pulling line speed, and can be adjusted between 0.25m/s~2m/s as needed.

3. The length angle of the test equipment can be adjusted according to the actual testing requirements, and the adjustment range is 100mm~500mm and the angle is 0~90°C.

4. The opening and closing force is measured and displayed with auxiliary instruments, and the time pause can be adjusted when the drawer is opened and closed, and the number of testing machines can be set.

5. The whole machine is beautiful, there should be no moving parts exposed, and the operation is simple.

6. At the same time, the drawer and the cabinet door slamming opening and closing device are configured.


  • Previous:
  • Next:

  • Write your message here and send it to us