-
High and low temperature test chamber
High and low temperature test chamber, also known as environmental test chamber, is suitable for industrial products, high temperature, low temperature reliability test. For electronic and electrical engineering, automobile and motorbike, aerospace, ships and weapons, colleges and universities, scientific research units and other related products, parts and materials in the high temperature, low temperature (alternating) cyclic changes in the situation, the test of its performance indicators for product design, improvement, identification and inspection, such as: aging test.
-
Tracking Test Apparatus
The use of rectangular platinum electrodes, the two poles of the specimen force were 1.0N ± 0.05 N. Applied voltage in the 100 ~ 600V (48 ~ 60Hz) between the adjustable, short-circuit current in the 1.0 ± 0.1A, the voltage drop should be no more than 10%, when the test circuit, the short-circuit leakage current is equal to or greater than 0.5A, the time is maintained for 2 seconds, the relay action to cut off the current, the indication of the The test piece fails. Dropping device time constant adjustable, precise control of drop size 44 ~ 50 drops / cm3 and drop interval 30 ± 5 seconds.
-
Fabric and clothing wear resistance testing machine
This instrument is used to measure various textiles (from very thin silk to thicker woolen fabrics, camel hair, carpets) knitted products. (such as comparing the toe, heel and body of a sock) the wear resistance. After replacing the grinding wheel, it is also suitable for wear resistance testing of leather, rubber, plastic sheets and other materials.
Applicable standards: ASTM D3884, DIN56963.2, ISO5470-1, QB/T2726, etc.
-
Hot Wire Ignition Test Apparatus
The Scorch Wire Tester is a device for evaluating the flammability and fire propagation characteristics of materials and finished products in the event of a fire incident. It simulates the ignition of parts in electrical equipment or solid insulating materials due to fault currents, overload resistance and other heat sources.
-
Rain Test Chamber Series
The rain test machine is designed for testing the waterproof performance of external lighting and signaling devices, as well as automotive lamps and lanterns. It ensures that electrotechnical products, shells, and seals can perform well in rainy environments. This product is scientifically designed to simulate various conditions such as dripping, drenching, splashing, and spraying. It features a comprehensive control system and utilizes frequency conversion technology, allowing for automatic adjustment of the rotation angle of the rainfall test specimen rack, the swing angle of the water spray pendulum, and the frequency of water spray swing.
-
IP56 Rain Test Chamber
1. Advanced factory, leading technology
2. Reliability and applicability
3. Environmental protection and energy saving
4. Humanization and automated system network management
5. Timely and perfect after-sales service system with long-term guarantee.
-
Sand And Dust Chamber
The sand and dust test chamber, scientifically known as “sand and dust test chamber”, simulates the destructive nature of wind and sand climate on the product, suitable for testing the sealing performance of the product shell, mainly for the shell protection grade standard IP5X and IP6X two levels of testing. The equipment has a dust-laden vertical circulation of airflow, the test dust can be recycled, the entire duct is made of imported high-grade stainless steel plate, the bottom of the duct and the conical hopper interface connection, fan inlet and outlet directly connected to the duct, and then at the appropriate location on the top of the studio diffusion port into the studio body, forming an “O” closed vertical Dust blowing circulation system, so that the airflow can flow smoothly and the dust can be dispersed evenly. A single high-power low noise centrifugal fan is used, and the wind speed is adjusted by frequency conversion speed regulator according to the test needs.
-
Standard Color Light Box
1、Advanced factory, leading technology
2、Reliability and applicability
3、Environmental protection and energy saving
4、Humanization and automated system network management
5、Timely and perfect after-sales service system with long-term guarantee.
-
TABER Abrasion Machine
This machine is suitable for cloth, paper, paint, plywood, leather, floor tile, glass, natural plastic and so on. The test method is that the rotating test material is supported by a pair of wear wheels, and the load is specified. The wear wheel is driven when the test material is rotating, so as to wear the test material. The wear loss weight is the weight difference between the test material and the test material before and after the test.
-
Multi-functional abrasion testing machine
Multi-functional abrasion testing machine for TV remote control button screen printing, plastic, mobile phone shell, headset shell Division screen printing, battery screen printing, keyboard printing, wire screen printing, leather and other types of electronic products surface of the oil spray, screen printing and other printed matter for wear, assess the degree of wear resistance.
-
Precision Oven
This oven is widely used for heating and curing, drying and dehydrating materials and products in the hardware, plastic, pharmaceutical, chemical, food, agricultural and sideline products, aquatic products, light industry, heavy industry and other industries. For example, raw materials, raw medicine, Chinese medicine tablets, infusion, powder, granules, punch, water pills, packaging bottles, pigments and dyes, dehydrated vegetables, dried melons and fruits, sausages, plastic resins, electrical components, baking paint, etc.
-
Thermal Shock Test Chamber
Thermal Shock Test Chambers are used to test the chemical changes or physical damage caused by the thermal expansion and contraction of a material structure or composite. It is used to test the degree of chemical changes or physical damage caused by thermal expansion and contraction in the shortest possible time by subjecting the material to continuous exposure to extremely high and low temperatures. It is suitable for use on materials such as metals, plastics, rubber, electronics etc. and can be used as a basis or reference for product improvement.
Products
-
Phone
-
E-mail
-
Whatsapp
-
WeChat
-
Top