-
Constant temperature and humidity testers
Constant temperature and humidity test chamber, also known as environmental test chamber, test a variety of materials heat resistance, cold resistance, dry resistance, moisture resistance performance. It is suitable for testing the quality of electronic, electrical, communication, instrumentation, vehicles, plastic products, metal, food, chemical, building materials, medical, aerospace and other products.
-
UV Accelerated Aging Tester
This product uses fluorescent UV lamps that best simulate the UV spectrum of sunlight, and combines temperature control and humidity supply devices to simulate the high temperature, high humidity, condensation and dark rain cycles of sunlight (UV section) that cause damage to materials such as discolouration, loss of brightness, strength, cracking, peeling, chalking and oxidation. At the same time, through the synergistic effect between UV light and moisture makes the single light resistance or single moisture resistance of the material weaken or fail, so widely used in the evaluation of the weather resistance of materials, the equipment has the best sunlight UV simulation, the use of low maintenance costs, easy to use, the equipment uses the control of automatic operation, high degree of automation of the test cycle, good stability of light, test results reproducibility and other characteristics.
-
Vertical and horizontal combustion tester
Vertical and horizontal combustion test mainly refers to UL 94-2006, GB/T5169-2008 series of standards such as the use of prescribed size of the Bunsen burner (Bunsen burner) and a specific gas source (methane or propane), according to a certain height of the flame and a certain angle of the flame on the horizontal or vertical state of the test specimen is a number of times timed to apply combustion to test specimens ignited, burning burning duration and length of burning to assess its flammability and fire hazard. The ignition, burning duration and burning length of the test article are used to assess its flammability and fire hazard.
-
High and low temperature test chamber
High and low temperature test chamber, also known as environmental test chamber, is suitable for industrial products, high temperature, low temperature reliability test. For electronic and electrical engineering, automobile and motorbike, aerospace, ships and weapons, colleges and universities, scientific research units and other related products, parts and materials in the high temperature, low temperature (alternating) cyclic changes in the situation, the test of its performance indicators for product design, improvement, identification and inspection, such as: aging test.
-
Tracking Test Apparatus
The use of rectangular platinum electrodes, the two poles of the specimen force were 1.0N ± 0.05 N. Applied voltage in the 100 ~ 600V (48 ~ 60Hz) between the adjustable, short-circuit current in the 1.0 ± 0.1A, the voltage drop should be no more than 10%, when the test circuit, the short-circuit leakage current is equal to or greater than 0.5A, the time is maintained for 2 seconds, the relay action to cut off the current, the indication of the The test piece fails. Dropping device time constant adjustable, precise control of drop size 44 ~ 50 drops / cm3 and drop interval 30 ± 5 seconds.
-
Fabric and clothing wear resistance testing machine
This instrument is used to measure various textiles (from very thin silk to thicker woolen fabrics, camel hair, carpets) knitted products. (such as comparing the toe, heel and body of a sock) the wear resistance. After replacing the grinding wheel, it is also suitable for wear resistance testing of leather, rubber, plastic sheets and other materials.
Applicable standards: ASTM D3884, DIN56963.2, ISO5470-1, QB/T2726, etc.
-
Hot Wire Ignition Test Apparatus
The Scorch Wire Tester is a device for evaluating the flammability and fire propagation characteristics of materials and finished products in the event of a fire incident. It simulates the ignition of parts in electrical equipment or solid insulating materials due to fault currents, overload resistance and other heat sources.
-
Walk-in Constant Temperature and Humidity Room
The outer frame structure of this equipment is made of double-sided colour steel heat preservation library board combination, the size of which is ordered according to the customer’s requirements, and is configured according to different requirements. The aging room is mainly composed of box, control system, wind circulation system, heating system, time control system, test load and so on.
-
Rain Test Chamber Series
The rain test machine is designed for testing the waterproof performance of external lighting and signaling devices, as well as automotive lamps and lanterns. It ensures that electrotechnical products, shells, and seals can perform well in rainy environments. This product is scientifically designed to simulate various conditions such as dripping, drenching, splashing, and spraying. It features a comprehensive control system and utilizes frequency conversion technology, allowing for automatic adjustment of the rotation angle of the rainfall test specimen rack, the swing angle of the water spray pendulum, and the frequency of water spray swing.
-
IP56 Rain Test Chamber
1. Advanced factory, leading technology
2. Reliability and applicability
3. Environmental protection and energy saving
4. Humanization and automated system network management
5. Timely and perfect after-sales service system with long-term guarantee.
-
Sand And Dust Chamber
The sand and dust test chamber, scientifically known as “sand and dust test chamber”, simulates the destructive nature of wind and sand climate on the product, suitable for testing the sealing performance of the product shell, mainly for the shell protection grade standard IP5X and IP6X two levels of testing. The equipment has a dust-laden vertical circulation of airflow, the test dust can be recycled, the entire duct is made of imported high-grade stainless steel plate, the bottom of the duct and the conical hopper interface connection, fan inlet and outlet directly connected to the duct, and then at the appropriate location on the top of the studio diffusion port into the studio body, forming an “O” closed vertical Dust blowing circulation system, so that the airflow can flow smoothly and the dust can be dispersed evenly. A single high-power low noise centrifugal fan is used, and the wind speed is adjusted by frequency conversion speed regulator according to the test needs.
-
Standard Color Light Box
1、Advanced factory, leading technology
2、Reliability and applicability
3、Environmental protection and energy saving
4、Humanization and automated system network management
5、Timely and perfect after-sales service system with long-term guarantee.
