Large high temperature explosion-proof oven
Application
Large High Temperature Explosion-Proof Oven
The equipment adopts the circulation fan to absorb the air in the working room, inhale it into the air duct, pass through the heating element, heat the air, and then the hot air is evenly blown into the studio through the double-side air duct for heat exchange with the workpiece. Then the top volute air duct is sucked into the middle of the studio to form a forced convection circulation. This repeated cycle increases the temperature of the studio. The structure of the equipment and the principle of hot air circulation ensure the temperature uniformity of each area in the oven, and eliminate the low temperature dead Angle and blind area. The door latch adopts lever type door latch. Beautiful and generous!
Technical Parameter
Large High Temperature Explosion-Proof Oven
Model |
KS-FB900GX |
Operating temperature range | RT~200℃ |
Voltage | 380V/50HZ |
Heating power | 150KW/ divided into 6 groups heating control |
Power of blower | 7500W/380/50HZ*1 |
Temperature control accuracy/resolution | ±2℃ |
Temperature uniformity | ±5℃ (under no-load constant temperature) |
Internal dimension of equipment | 2200 mm *3000 mm *1800 mm (D*W*H) can be customized |
Steel plate load -bearing | The load-bearing capacity of the studio steel plate is about 3 tons |
Temperature controller | The main control adopts programmed temperature controlled LED/ intelligent/even number display/temperature controller, the control accuracy is ±1℃, with P.I.D self-tuning adjustment, automatic constant temperature. |
Temperature measuring equipment | Two K-type temperature sensing devices, accurate temperature measurement ±1%FS |
Other protection | Overload protection, over current protection, lack of phase protection, over temperature protection, internal and external micro pressure difference protection |
Write your message here and send it to us