Universal Salt Spray Tester
Application
This product is suitable for parts, electronic components, protective layer of metal materials and salt spray corrosion test of industrial products. Widely used in electricians, electronic equipment, electronic components, electronics, home appliances hardware accessories, metal materials, paint products and other industries.
Kexun's salt spray tester has a simple and generous appearance, reasonable structure and very comfortable overall structure, which is the most popular style in the market.
The cover of the tester is made of PVC or PC sheet, which is high temperature resistant, corrosion resistant, easy to clean and no leakage. In the testing process, we can clearly observe the test conditions inside the box from the outside without affecting the test results. And the lid is designed with 110 degree practical top angle, so that the condensate generated during the test will not drip down to the sample to affect the test results. The lid is watertight to prevent salt spray from escaping.
Its operation is very simple, according to the instruction manual, add the adjusted salt water, adjust the size of salt spray, test time, turn on the power can be used.
When the water pressure, water level, etc. is not enough, the console will be based on the equipment, prompting the problem.
Salt spray test is the corrosion resistance test of products made of various materials after electroplating, anodizing, painting, anti-rust oil and other anti-corrosion treatment.
Salt spray testing machine is the use of tower air spray, the principle of the spray device is: the use of compressed air from the nozzle high-speed jet generated by high-speed air, the formation of negative pressure above the suction tube, salt solution in the atmospheric pressure along the suction tube quickly rise to the nozzle; After high-speed air atomization, it is sprayed to the conical mist separator at the top of the spray tube, and then ejected from the spray port to the diffusion laboratory. The test air forms a diffusion state and naturally lands in the sample for salt spray corrosion resistance test.
Parameter
| Model | KS-YW60 | KS-YW90 | KS-YW120 | KS-YW160 | KS-YW200 |
| Test chamber dimensions (cm) | 60×45×40 | 90×60×50 | 120×80×50 | 160×100×50 | 200×120×60 |
| Outer chamber dimensions (cm) | 107×60×118 | 141×88×128 | 190×110×140 | 230×130×140 | 270×150×150 |
| Test chamber temperature | Salt water test (NSSACSS) 35°C±0.1°C / Corrosion resistance test (CASS) 50°C±0.1°C | ||||
| Brine temperature | 35℃±0.1℃, 50℃±0.1℃ | ||||
| Test chamber capacity | 108L | 270L | 480L | 800L | 1440L |
| Brine tank capacity | 15L | 25L | 40L | 80L | 110L |
| Compressed air pressure | 1.00 士0.01kgf/cm2 | ||||
| Spray volume | 1.0-20ml / 80cm2 / h (collected for at least 16 hours and averaged) | ||||
| Relative humidity of the test chamber | Over 85% | ||||
| pH value | PH6.5-7.2 3.0-3.2 | ||||
| Spraying method | Programmable spraying (including continuous and intermittent spraying) | ||||
| Power supply | AC220V 1Ф 10A | ||||
| AC220V1Ф 15A | |||||
| AC220V 1Ф 30A | |||||
