-
Universal Salt Spray Tester
This product is suitable for parts, electronic components, protective layer of metal materials and salt spray corrosion test of industrial products. Widely used in electricians, electronic equipment, electronic components, electronics, home appliances hardware accessories, metal materials, paint products and other industries.
-
Vertical and horizontal combustion tester
Vertical and horizontal combustion test mainly refers to UL 94-2006, GB/T5169-2008 series of standards such as the use of prescribed size of the Bunsen burner (Bunsen burner) and a specific gas source (methane or propane), according to a certain height of the flame and a certain angle of the flame on the horizontal or vertical state of the test specimen is a number of times timed to apply combustion to test specimens ignited, burning burning duration and length of burning to assess its flammability and fire hazard. The ignition, burning duration and burning length of the test article are used to assess its flammability and fire hazard.
-
High and low temperature test chamber
High and low temperature test chamber, also known as environmental test chamber, is suitable for industrial products, high temperature, low temperature reliability test. For electronic and electrical engineering, automobile and motorbike, aerospace, ships and weapons, colleges and universities, scientific research units and other related products, parts and materials in the high temperature, low temperature (alternating) cyclic changes in the situation, the test of its performance indicators for product design, improvement, identification and inspection, such as: aging test.
-
Rain Test Chamber Series
The rain test machine is designed for testing the waterproof performance of external lighting and signaling devices, as well as automotive lamps and lanterns. It ensures that electrotechnical products, shells, and seals can perform well in rainy environments. This product is scientifically designed to simulate various conditions such as dripping, drenching, splashing, and spraying. It features a comprehensive control system and utilizes frequency conversion technology, allowing for automatic adjustment of the rotation angle of the rainfall test specimen rack, the swing angle of the water spray pendulum, and the frequency of water spray swing.
-
IP56 Rain Test Chamber
1. Advanced factory, leading technology
2. Reliability and applicability
3. Environmental protection and energy saving
4. Humanization and automated system network management
5. Timely and perfect after-sales service system with long-term guarantee.
-
Sand And Dust Chamber
The sand and dust test chamber, scientifically known as “sand and dust test chamber”, simulates the destructive nature of wind and sand climate on the product, suitable for testing the sealing performance of the product shell, mainly for the shell protection grade standard IP5X and IP6X two levels of testing. The equipment has a dust-laden vertical circulation of airflow, the test dust can be recycled, the entire duct is made of imported high-grade stainless steel plate, the bottom of the duct and the conical hopper interface connection, fan inlet and outlet directly connected to the duct, and then at the appropriate location on the top of the studio diffusion port into the studio body, forming an “O” closed vertical Dust blowing circulation system, so that the airflow can flow smoothly and the dust can be dispersed evenly. A single high-power low noise centrifugal fan is used, and the wind speed is adjusted by frequency conversion speed regulator according to the test needs.
-
Standard Color Light Box
1、Advanced factory, leading technology
2、Reliability and applicability
3、Environmental protection and energy saving
4、Humanization and automated system network management
5、Timely and perfect after-sales service system with long-term guarantee.
-
Thermal Shock Test Chamber
Thermal Shock Test Chambers are used to test the chemical changes or physical damage caused by the thermal expansion and contraction of a material structure or composite. It is used to test the degree of chemical changes or physical damage caused by thermal expansion and contraction in the shortest possible time by subjecting the material to continuous exposure to extremely high and low temperatures. It is suitable for use on materials such as metals, plastics, rubber, electronics etc. and can be used as a basis or reference for product improvement.
-
Computerised Single Column Tensile Tester
Computerized tensile testing machine is mainly used for mechanical property test of metal wire, metal foil, plastic film, wire and cable, adhesive, artificial board, wire and cable, waterproof material and other industries in the way of tensile, compression, bending, shearing, tearing, peeling, cycling and so on. Widely used in factories and mines, quality supervision, aerospace, machinery manufacturing, wire and cable, rubber and plastic, textile, construction and building materials, home appliances and other industries, material testing and analysis.
-
Three-axis Electromagnetic Vibration Test Table
Three-axis series electromagnetic vibration table is an economic, but ultra-high cost performance of a sinusoidal vibration test equipment (function function cover fixed frequency vibration, linear sweep frequency vibration, log sweep frequency, frequency doubling, program, etc.), In the test chamber to simulate the electrical and electronic products in the transportation (ship, aircraft, vehicle, space vehicle vibration), storage, the use of the process of vibration and its impact, and assess its adaptability.
-
Drop testing machine
The drop testing machine is mainly used to simulate the natural drop that unpackaged/packaged products may be subjected to during handling, and investigate the ability of products to resist unexpected shocks. Usually the drop height is based on the weight of the product and the possibility of falling as a reference standard, the falling surface should be a smooth, hard rigid surface made of concrete or steel
-
Package Clamp Force Testing Equipment Box Compression Tester
Clamping force test equipment is a kind of test equipment used to test the tensile strength, compressive strength, bending strength and other properties of materials. It is used to simulate the impact of the clamping force of the two cleats on the packaging and goods when the clamping car is loading and unloading the packaging, and evaluate the clamping strength of the packaging, which is suitable for the finished packaging of kitchenware, furniture, home appliances, toys, etc. The clamping force testing machine usually includes a testing machine, fixtures and sensors.
Packaging and transport tests
-
Phone
-
E-mail
-
Whatsapp
-
WeChat
-
Top